Back to Blog
Tips & Care 2026-11-17 RPM TESLA ACCESSORIES – RPM TESLA Aftermarket 0 views

Model 3 Fog Light Canards: Black-Out Style Fit and Care Tips

Model 3 Fog Light Canards: Black-Out Style Fit and Care Tips

Match your Model 3's model year to the right canard, pick a finish you can live with, and keep the 3M VHB tape and ABS plastic looking sharp with a simple care routine.

Check the sensor hole before you order

The most important fitment detail for these canards is not the finish or the price. It is the small opening for the ultrasonic parking sensors. According to the catalog, these canards fit all Model 3s, but they have an open hole for the sensors found on Model 3s made from 2017 through 2022. The same listing notes that new tooling is being made to remove that hole for 2023 and later versions.

That means the 2017-2022 window is the one this part is explicitly described for. If you drive a 2023 or newer Model 3, the supplied information does not confirm a no-hole version is available yet, so treat that as an open question rather than a guaranteed fit. Check your model year and your front bumper's sensor layout before you buy.

Fitment facts from the catalog

Pick a finish you can actually maintain

The canards come in four finishes: Glossy Black, Satin Black, Hydro Carbon Fiber Coated Glossy, and Hydro Carbon Fiber Coated Matte. All four are printed or coated looks on ABS plastic, not real carbon fiber, so the care routine is about protecting a finish rather than nourishing exposed weave.

Glossy finishes show water spots and fine scratches more readily, so they reward a gentler wash and a quick dry. Satin and matte finishes hide swirls better but can turn shiny if you scrub them with an abrasive pad or polish. Pick the finish that matches how much attention you want to give the front bumper, not just how it looks in a photo.

Installation care: work with the tape, not against it

The catalog states that the canards hold on with 3M VHB double-sided tape and points readers to an installation video. The video shown is for the carbon fiber version, but the catalog says installation is the same for these plastic ones. The exact surface-prep steps are not spelled out in the supplied text, so follow the video rather than improvising a procedure.

  1. Test-fit before removing any tape liner: Hold the canard against the bumper and check that the sensor hole lines up with your car's sensor position. Do this dry, with the backing still on.
  2. Keep the mounting area clean and dry: 3M VHB needs a clean, dry surface to bond well. The catalog does not list a specific cleaner, so use the method shown in the installation video.
  3. Press and hold according to the video: The supplied information does not give a hold time or curing temperature. Follow the video's guidance instead of guessing.
  4. Let the bond settle before a wash or a fast drive: Avoid stressing fresh tape with water or high speed right away. The catalog does not specify a wait time, so use the video's recommendation.

A simple cleaning routine for black-out canards

ABS plastic with a glossy or satin finish does not need special products, but it does respond badly to harsh scrubbing. Keep the routine short and repeatable.

  • Rinse first: Flush loose dirt off the canards before touching them, so grit does not get dragged across the finish.
  • Use a soft wash mitt and mild car shampoo: Wash the canards with the same gentle soap you use on painted panels. Avoid abrasive pads and strong degreasers on the coated finishes.
  • Dry the gloss finishes: Glossy Black and the glossy hydro carbon finish show water spots, so dry them with a soft microfiber towel rather than letting them air-dry.
  • Skip the polish on matte and satin: Polishing a matte or satin finish can add shine and change its look. Clean it and leave it alone.
  • Check the tape line after every wash: Look along the top edge of each canard for lifting tape. Catching a loose edge early is easier than re-bonding a canard that has already shifted.

What the canards do, and what they do not

The catalog describes these canards as blacking out the eyelids beneath the fog lights and directing air downward and through the fender opening. It also notes that canards historically add a modest amount of downforce and can direct more air toward the front bumper inlets and wheels. The same listing is honest that the main benefit is a sportier front end unless you are racing on a track.

So treat this as an appearance part with a small aero side effect, not a performance upgrade. That framing also tells you how much care it needs: keep the finish clean, keep the tape secure, and the part will keep looking like the photos.

Product details that affect care

Related Articles

Customer Service
Home
Products
Cart
Profile